Add:Huangde Town Fengqiu Country Xinxiang City Country/Region:China (Mainland)
Fax:+86-373-3716632 / 8307350
YOX450 Pump Motor Hydraulic Couplings
Installation sequence of hydraulic coupler: 1. Check the keyway and remove the key from the motor shaft or reducer shaft and install it into the keyway of the coupling shaft hole. 2. Check the key and install the key on the motor shaft and the reducer shaft respectively to check whether the...Chat Now
Installation sequence of hydraulic coupler:
1. Check the keyway and remove the key from the motor shaft or reducer shaft and install it into the keyway of the coupling shaft hole.
2. Check the key and install the key on the motor shaft and the reducer shaft respectively to check whether the total height of the key meets the requirements.
3. Apply oil to the motor shaft, reducer shaft and coupling shaft hole.
4. Install the semi-coupler. If it is driven by the outer wheel, install the first half coupling of the coupling onto the motor shaft. If it is driven by the inner wheel, install the semi-coupler on the reducer shaft.
It can be hit with wooden block, or it can also be heated by heating method, which requires uniform heating to prevent the coupling from being damaged due to uneven heating.
5. Install the coupling body. If the coupling body is driven by external wheel, install the coupling main axle hole on the reducer shaft;
If it is driven by the inner wheel, the coupling shaft hole is installed on the motor shaft.
It is absolutely not allowed to hit the coupler shell. Copper rod can be installed to hit the back end of the coupling spindle, or the coupling spindle can be pulled towards the loading shaft by tightening bolts.
6. It is better to stand up the motor, which is easy to install vertically.
Special circumstances allow heating assembly, but the main shaft hole temperature shall not be higher than 80 ℃, otherwise easy to damage the oil seal.
Install the elastomer and install the elastomer of the elastic coupling onto the other half.
7. The coupling of two half coupling shafts smoothly pushes the motor to the side of the reducer, so that the two half coupling and elastic block can be combined.
Company: Xinxiang Jintian Hydraulic Transmission Co., Ltd.
If you are satisfied with our yox450 pump motor hydraulic couplings, welcome to wholesale the best quality, safe and durable equipment with our factory. We also welcome customized orders. Check the price list and the quotation with our manufacturers and suppliers now.