Xinxiang hydraulic coupling factory production of hydraulic coupling into the working fluid into the cavity, when the input shaft drives the pump wheel rotation, the vane and the impeller chamber under the action of the energy of the working fluid pressure and speed of pump wheel flange, then...
Xinxiang hydraulic coupling factory production of hydraulic coupling into the working fluid into the cavity, when the input shaft drives the pump wheel rotation, the vane and the impeller chamber under the action of the energy of the working fluid pressure and speed of pump wheel flange, then flows into the turbine, impact turbine drives the output shaft rotation.When the working fluid is working on the turbine, the energy decreases, the rotational speed decreases, and the turbine flows into the pump cavity to absorb energy.The energy transfer between the pump wheel and the turbine is realized.
At the fixed pump speed, the more oil, the greater the transmission of the moving torque. If the dynamic torque is the same, the more oil, the higher the rotational speed.Therefore, the amount of oil can be changed to adjust the speed of the turbine.
The two basic methods of the hydraulic coupling of the hydraulic coupler in xinxiang city are to adjust the oil amount to the work oil, and the other is to adjust the oil flow.The oil content of the oil is adjusted by the oil intake control valve, and the output of the oil is adjusted by adjusting the radial displacement of the spoontube in the rotating sleeve.Modern coupling charge and discharge control is adopted.Modern oil coupling works rapidly, coupled with unstable operation.This is because the speed is less than the consumption of small, oil and oil, which increases the value of the oil in the pump wheel, and then drains into the oil cooler of the oil cooler, which is not hot enough to cool the coupling, causing the temperature to rise.
In the case of the input shaft rotation speed, the fluid coupling device produced by the hydraulic coupling plant in xinxiang city can get the change of output shaft speed.No load started.The clutch is convenient and can transfer thrust oil and speed of the coupling.The oil can be separated, the clutch is convenient, can realize no-load start.There is no mechanical contact between impeller and turbine clutch torque, through the liquid, the flexible connection, if the drive shaft torque is cyclical fluctuations, will not spread to the driven shaft, has good isolation effect, also can greatly reduce the impact load.
If you are satisfied with our voith fluid coupling, welcome to wholesale the best quality, safe and durable equipment with our factory. We also welcome customized orders. Check the price list and the quotation with our manufacturers and suppliers now.
Hot Tags: voith fluid coupling, manufacturers, suppliers, factory, wholesale, quotation, customized, price list